Cleaning the bottom

Large dirt particulates, which settle to the bottom or stick to swimming pool walls, are removed using a vacuum cleaner. The bottom cleaning kit consists of a vacuum cleaner, a telescope rod and a suction hose. The suction hose should be connected to the vacuum cleaner and by means of a telescope rod it should be submerged in water. Next, manoeuvre the vacuum cleaner in order to remove air and fill the suction hose with water In order to fill the hose, you can also use the water stream of the inlet nozzle. The other end of the hose is connected to the skimmer by means of a special plate mounted in the strainer basket. The suction hose should at all times be filled with water.

If there is a lot of pollution at the bottom – for example after shock disinfection, you might want to vacuum with direct outflow of water to sewage system, without exploitation of the filter. Normally, you do not need to disconnect the filter. Clean the pool’s walls and bottom, then switch on the pump. Disconnect the hose and the plate in the skimmer’s basket and clean the strainer. Close the valves on the conduits supplying water to the pool and empty the pump strainer.

COVID 19 - POSSIBLE DELAYS OF DELIVERY

Dear customers,

We would like to inform you that despite the current difficult situation related to the COVID-19 virus, we have taken all necessary measures to maintain the smoothness of our service and delivery times for our customers.

Unfortunately, the increasing number of border controls throughout Europe, as well as the closing of borders with neighboring countries, also affects the areas of our operations and services. We expect delays in procurement and deliveries, so at the moment we are unable to guarantee exact delivery dates.

We kindly ask you to be patient in case the goods do not arrive on time. The current situation presents us with many challenges and we are doing everything we can to adapt to these difficult conditions.