[et_pb_section fb_built=”1″ _builder_version=”4.8.2″ _module_preset=”default” locked=”off”][et_pb_row _builder_version=”4.8.2″ _module_preset=”default” custom_margin=”||0px||false|false” custom_padding=”||0px||false|false”][et_pb_column type=”4_4″ _builder_version=”4.8.2″ _module_preset=”default”][et_pb_post_title meta=”off” featured_image=”off” _builder_version=”4.8.2″ _module_preset=”default”][\/et_pb_post_title][\/et_pb_column][\/et_pb_row][et_pb_row column_structure=”1_2,1_2″ use_custom_gutter=”on” gutter_width=”2″ _builder_version=”4.8.2″ _module_preset=”default”][et_pb_column type=”1_2″ _builder_version=”4.8.2″ _module_preset=”default”][et_pb_text _builder_version=”4.9.0″ _module_preset=”default” hover_enabled=”0″ sticky_enabled=”0″]<\/p>\n
Problem<\/strong> Problem<\/strong> Problem<\/strong> Problem<\/strong> Problem<\/strong> Problem<\/strong> [\/et_pb_text][\/et_pb_column][et_pb_column type=”1_2″ _builder_version=”4.8.2″ _module_preset=”default”][et_pb_text _builder_version=”4.9.0″ _module_preset=”default” hover_enabled=”0″ sticky_enabled=”0″]<\/p>\n Problem<\/strong> Problem<\/strong> Problem<\/strong> Problem<\/strong> Problem<\/strong> [\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section]<\/p>\n","protected":false},"excerpt":{"rendered":" ProblempH value difficult to adjustCauseAlkalinity of water is too highSolutionMeasure the alkalinity of water, in needed adjust pH adjustment ProblemLime scale is formed in the swimming pool and on the equipmentCauseToo high pH value of water or too high content of calcium.SolutionToo high pH value is reduced using pH agents. If the content of calcium […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":69,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"on","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"tags":[35],"class_list":["post-738","page","type-page","status-publish","hentry","tag-care-advice"],"yoast_head":"\n
pH value difficult to adjust
Cause<\/strong>
Alkalinity of water is too high
Solution<\/strong>
Measure the alkalinity of water, in needed adjust pH adjustment<\/p>\n
Lime scale is formed in the swimming pool and on the equipment
Cause<\/strong>
Too high pH value of water or too high content of calcium.
Solution<\/strong>
Too high pH value is reduced using pH agents. If the content of calcium is too high, add soft water. Do not use chlorine preparations containing calcium. Use Melpool CAL, which prevents the depositing of lime scale.<\/p>\n
Smell of chlorine as well as skin and eyes irritation.
Cause<\/strong>
Improper pH level
Solution<\/strong>
Control water and if need be, adjust the pH level.<\/p>\n
Free chlorine disappears very fast
Cause<\/strong>
Too low amount of free chlorine, intensive swimming, high pollution level and high temperature
Solution<\/strong>
Shock disinfection using chlorine, use of chlorine stabiliser<\/p>\n
Corrosion attack
Cause<\/strong>
Too low pH level
Solution<\/strong>
Increase pH level using PH+<\/p>\n
Growth of algae, turbid water, green water
Cause<\/strong>
Too little chlorine or too high pH value
Solution<\/strong>
Balance the pH value Use shock chlorine disinfection, add flocculation agents, vacuum the bottom and add algaecides<\/p>\n
Turbid water
Cause<\/strong>
Growth of algae
Too high pH level
Not satisfactory cleaning
Too high content of calcium
Solution<\/strong>
Use shock chlorine disinfection
Balance the pH value
Check the pump and the filter. Start the pump at “CIRCULATE” setting and check the current strength. Perform filter backwashing.
Replace at least one third of water with soft water. Do not use chlorine preparations containing calcium.<\/p>\n
Swimming suits become faded
Cause<\/strong>
Chlorine overdosing
Solution<\/strong>
Add agents which reduce chlorine content or add fresh water.<\/p>\n
Water is brownish or blue-green
Cause<\/strong>
Too high content of iron or copper.
Solution<\/strong>
Flocculation. Add Melpool CAL. In the worst scenario, replace half the water.<\/p>\n
There is foam in the swimming pool
Cause<\/strong>
Overdosing the algaecide
Solution<\/strong>
In the next two weeks, do not add this agent. After that, dose the agent as recommended.<\/p>\n
A black strip along the waterline.
Cause<\/strong>
Pollution, manganese
Solution<\/strong>
Lower the water level and clean the dirt using a brush and Melpool GEL agent.<\/p>\n